Supercombinata EASY Compact

The Supercombinata EASY Compact, thanks to its standard equipment, is suitable to perform internal line boring and internal overlay welding within a working range from Ø 42 mm to Ø 250 mm in very small spaces. By means of extra kits it is able to perform external line boring, facing of orthogonal planes and creation of circlips grooves. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.

DIAMETERS

Boring bar diameter: ø 40 mm x 2200 mm

In line boring: ø 42 – 250 mm

External line boring: Extra kit

Internal welding: ø 42 – 250 mm

Facing of orthogonal planes: Extra kit

ROTATION MOTOR

AC motor: Single phase

Power at rated speed: 1800 W

Output torque at the bar: 290 Nm with 120 rpm

1° speed: max 100 rpm (170 Nm)

2° speed: max 340 rpm (50 Nm)

FEED MOTOR

Gear motor: DC

Power at rated speed: 90 W

Max speed: 11 rpm

Feed system: Electromechanical

Feed: Manual/Automatic

WELDING TECHNOLOGY

Spiral: Continous with variable step

Welding machine: Compatible with MIG/MAG wire with EURO connector

LONGITUDINAL STROKE

Unlimited: With 250 mm pitch

ELECTRONIC CONTROL PANEL

Voltage: 220/240 V (50/60 Hz)

Main switch: Available

Emergency switch: Available

Inverter feed: RH/LH

Inverter rotation: CW/CCW

Speed regulator: Rotation/Feed

Electrical absorption: 2000 W

Control panel 110/120 V: Upon request

DIMENSIONS

Length: 545 mm

Width: 220 mm

Height: 380 mm

Weight central unit: 34 Kg

STANDARD EQUIPMENT

Qty 1 - Main unit

Qty 1 - Boring machine stand

Qty 1 - Electronical control panel

Qty 1 - Control panel holder

Qty 1 - Cable control panel /machine

Qty 1 - Power cable 220 V

Qty 1 - Boring bar ø 40x2200 mm

Qty 1 - Boring bar extension 420 mm

Qty 1 - Pivot

Qty 1 - Tool holder for boring d. 100-250 mm

Qty 1 - Special tool holder LH ø 12x40 mm

Qty 1 - Tool holder LH ø 12x40 mm

Qty 1 - Tool holder LH ø 12x60 mm

Qty 1 - Tool holder right RH ø 12x100 mm

Qty 1 - Box with 10 cutting inserts

Qty 2 - Main bar support

Qty 2 - Additional support

Qty 1 - Telescopic shaft for welding

Qty 5 - Diffusor extension 35 mm

Qty 4 - Short gas nozzle

Qty 4 - Long gas nozzle

Qty 5 - Short contact tip ø 0.8 mm wire

Qty 5 - Long contact tip ø 0.8 mm wire

Qty 1 - O-ring for welding shaft 100x5 mm

Qty 1 - Centring system for through holes

Qty 1 - Telescopic gauge up to ø 250 mm

Qty 1 - Dial gauge

Qty 1 - Dial gauge support

Qty 1 - Set of wrenches

Qty 1 - Screws and bolts

EXTRA KITS

BORING REDUCTION

KEP00187 Ø 22 - 44 mm (0,87” - 1,73”)

KEP00188 Ø 32 - 70 mm (1,26” - 2,76”)

FACING

KES00186 Ø 48 - 255 mm (1,89” - 10,04”)

OD MACHINING

KEL00202 Ø 100 - 200 mm - D. 200 mm (3,94” - 7,88”)